Bill Amendment: IL SB1371 | 2019-2020 | 101st General Assembly

NOTE: For additional amemendments please see the Bill Drafting List

---

Bill Title: SCH CD-TEMP DOOR LOCK DEVICE

Status: 2019-08-23 - Public Act . . . . . . . . . 101-0548 [SB1371 Detail]

Download: Illinois-2019-SB1371-Senate_Amendment_002.html

---

Sen. Chapin Rose

Filed: 4/5/2019

10100SB1371sam002 LRB101 09338 AXK 58967 a
AMENDMENT TO SENATE BILL 1371
AMENDMENT NO. ______. Amend Senate Bill 1371 by replacing
everything after the enacting clause with the following:
"Section 5. The School Code is amended by adding Sections
10-20.69 and 34-18.61 as follows:
(105 ILCS 5/10-20.69 new)
Sec. 10-20.69. Door security locking means.
(a) In this Section, "door security locking means" means a
door locking means intended for use by a trained school
district employee in a school building for the purpose of
preventing both ingress and egress through a door of the
building.
(b) A school district may install a door security locking
means on a door of a school building to prevent unwanted entry
through the door if all of the following requirements are met:
(1) The door security locking means can be engaged

10100SB1371sam002 - 2 - LRB101 09338 AXK 58967 a
without opening the door.
(2) The unlocking and unlatching of the door security
locking means from the occupied side of the door can be
accomplished without the use of a key or tool.
(3) Locks, if remotely engaged, can be unlocked from
the occupied side.
(4) The door security locking means is capable of being
disengaged from the outside by school district employees,
and school district employees may use a key or other
credentials to unlock the door from the outside.
(5) The door security locking means does not modify the
door-closing hardware, panic hardware, or fire exit
hardware.
(6) Any bolts, stops, brackets, or pins employed by the
door security locking means do not affect the fire rating
of a fire door assembly.
(7) School district employees are trained in the
engagement and release of the door security locking means,
from within and outside the room, as part of the emergency
response plan.
(8) For doors installed before July 1, 2019 only, the
unlocking and unlatching of a door security locking means
requires no more than 2 releasing operations. For doors
installed on or after July 1, 2019, the unlocking and
unlatching of a door security locking means requires no
more than one releasing operation. If doors installed

10100SB1371sam002 - 3 - LRB101 09338 AXK 58967 a
before July 1, 2019 are replaced on or after July 1, 2019,
the unlocking and unlatching of a door security locking
means on the replacement door requires no more than one
releasing operation.
(c) A school district must include the location of any door
security locking means and must address the use of the locking
and unlocking means from within and outside the room in its
filed school safety plan under the School Safety Drill Act.
Local law enforcement officials and the local fire department
must be notified of the location of any door security locking
means and how to disengage it. Any specific tool needed to
disengage the door security locking means from the outside of
the room must, upon request, be made available to local law
enforcement officials and the local fire department.
(d) A door security locking means may be used only (i) by a
school district employee trained under subsection (e), (ii)
during an emergency that threatens the health and safety of
students and employees or during an active shooter drill, and
(iii) when local law enforcement officials and the local fire
department have been notified of its installation prior to its
use. The door security locking means must be engaged for a
finite period of time in accordance with the school district's
school safety plan adopted under the School Safety Drill Act.
(e) A school district that has installed a door security
locking means shall conduct an in-service training program for
school district employees on the proper use of the door

10100SB1371sam002 - 4 - LRB101 09338 AXK 58967 a
security locking means. The school district shall keep a file
verifying the employees who have completed the program and
must, upon request, provide the file to its regional office of
education and the local fire department and local law
enforcement agency.
(f) A door security locking means that requires 2 releasing
operations must be discontinued from use when the door is
replaced or is a part of new construction. Replacement and new
construction door hardware must include mortise locks,
compliant with the applicable building code, and must be
lockable from the occupied side without opening the door.
However, mortise locks are not required if panic hardware or
fire exit hardware is required.
(105 ILCS 5/34-18.61 new)
Sec. 34-18.61. Door security locking means.
(a) In this Section, "door security locking means" means a
door locking means intended for use by a trained school
district employee in a school building for the purpose of
preventing both ingress and egress through a door of the
building.
(b) The school district may install a door security locking
means on a door of a school building to prevent unwanted entry
through the door if all of the following requirements are met:
(1) The door security locking means can be engaged
without opening the door.

10100SB1371sam002 - 5 - LRB101 09338 AXK 58967 a
(2) The unlocking and unlatching of the door security
locking means from the occupied side of the door can be
accomplished without the use of a key or tool.
(3) Locks, if remotely engaged, can be unlocked from
the occupied side.
(4) The door security locking means is capable of being
disengaged from the outside by school district employees,
and school district employees may use a key or other
credentials to unlock the door from the outside.
(5) The door security locking means does not modify the
door-closing hardware, panic hardware, or fire exit
hardware.
(6) Any bolts, stops, brackets, or pins employed by the
door security locking means do not affect the fire rating
of a fire door assembly.
(7) School district employees are trained in the
engagement and release of the door security locking means,
from within and outside the room, as part of the emergency
response plan.
(8) For doors installed before July 1, 2019 only, the
unlocking and unlatching of a door security locking means
requires no more than 2 releasing operations. For doors
installed on or after July 1, 2019, the unlocking and
unlatching of a door security locking means requires no
more than one releasing operation. If doors installed
before July 1, 2019 are replaced on or after July 1, 2019,

10100SB1371sam002 - 6 - LRB101 09338 AXK 58967 a
the unlocking and unlatching of a door security locking
means on the replacement door requires no more than one
releasing operation.
(c) The school district must include the location of any
door security locking means and must address the use of the
locking and unlocking means from within and outside the room in
its filed school safety plan under the School Safety Drill Act.
Local law enforcement officials and the local fire department
must be notified of the location of any door security locking
means and how to disengage it. Any specific tool needed to
disengage the door security locking means from the outside of
the room must, upon request, be made available to local law
enforcement officials and the local fire department.
(d) A door security locking means may be used only (i) by a
school district employee trained under subsection (e), (ii)
during an emergency that threatens the health and safety of
students and employees or during an active shooter drill, and
(iii) when local law enforcement officials and the local fire
department have been notified of its installation prior to its
use. The door security locking means must be engaged for a
finite period of time in accordance with the school district's
school safety plan adopted under the School Safety Drill Act.
(e) If the school district installs a door security locking
means, it must conduct an in-service training program for
school district employees on the proper use of the door
security locking means. The school district shall keep a file

10100SB1371sam002 - 7 - LRB101 09338 AXK 58967 a
verifying the employees who have completed the program and
must, upon request, provide the file to the local fire
department and local law enforcement agency.
(f) A door security locking means that requires 2 releasing
operations must be discontinued from use when the door is
replaced or is a part of new construction. Replacement and new
construction door hardware must include mortise locks,
compliant with the applicable building code, and must be
lockable from the occupied side without opening the door.
However, mortise locks are not required if panic hardware or
fire exit hardware is required.
Section 99. Effective date. This Act takes effect July 1,
2019.".