Bill Text: CA SB275 | 2009-2010 | Regular Session | Amended


Bill Title: Professional engineers.

Spectrum: Partisan Bill (Republican 1-0)

Status: (Introduced - Dead) 2010-01-21 - Returned to Secretary of Senate pursuant to Joint Rule 62(a). [SB275 Detail]

Download: California-2009-SB275-Amended.html
BILL NUMBER: SB 275	AMENDED
	BILL TEXT

	AMENDED IN SENATE  JANUARY 4, 2010

INTRODUCED BY   Senator Walters

                        FEBRUARY 24, 2009

   An act to amend Sections 6704, 6706.3, 6730, 6737.3, 6738, 6740,
6741, and 6787 of, to add Sections 6702.3, 6702.4, 6702.5, 6702.6,
6702.7, 6702.8, 6702.9, 6702.10, 6702.11,  6730.5, 
6730.6, 6730.7,  6731.7, and 6731.8   and 6731.7
 to, and to repeal  Sections 6704.1 and 6737.2
  Section 6704.1  of, the Business and Professions
Code, relating to engineers.



	LEGISLATIVE COUNSEL'S DIGEST


   SB 275, as amended, Walters. Professional engineers.
   Existing law establishes the Board for Professional Engineers and
Land Surveyors in the Department of Consumer Affairs. Existing law
recognizes various engineering disciplines. Existing law prohibits
the practicing of civil, electrical, and mechanical engineering by
any person who has not passed a specified examination and who is not
appropriately licensed by the board in that discipline. Existing law
makes various violations of the Professional Engineers Act a crime,
including the practice or offer to practice by a person of civil,
electrical, or mechanical engineering without authorization as
provided by the act.
   This bill would prohibit the practice of agricultural, chemical,
control system, fire protection, industrial, metallurgical, nuclear,
petroleum, and traffic engineering  , as defined,  by any
person who has not passed a specified examination and who is not
appropriately licensed by the board in the particular discipline.
 The bill would authorize any licensed engineer to practice
engineering work in any of those fields in which he or she is
competent and proficient.  The bill would make other changes to
related provisions.
   By revising  this   the  definition of a
crime to include additional engineering disciplines,  the
  this  bill would impose a state-mandated local
program.
   The California Constitution requires the state to reimburse local
agencies and school districts for certain costs mandated by the
state. Statutory provisions establish procedures for making that
reimbursement.
   This bill would provide that no reimbursement is required by this
act for a specified reason.
   Vote: majority. Appropriation: no. Fiscal committee: yes.
State-mandated local program: yes.


THE PEOPLE OF THE STATE OF CALIFORNIA DO ENACT AS FOLLOWS:

  SECTION 1.  Section 6702.3 is added to the Business and Professions
Code, to read:
   6702.3.  "Chemical engineer" as used in this chapter means a
professional engineer in the branch of chemical engineering and
refers to one who practices or offers to practice chemical
engineering in any of its phases.
  SEC. 2.  Section 6702.4 is added to the Business and Professions
Code, to read:
   6702.4.  "Control system engineer" as used in this chapter means a
professional engineer in the branch of control system engineering
and refers to one who practices or offers to practice control system
engineering in any of its phases.
  SEC. 3.  Section 6702.5 is added to the Business and Professions
Code, to read:
   6702.5.  "Fire protection engineer" means a professional engineer
in the branch of fire protection engineering and refers to one who
practices or offers to practice fire protection engineering in any of
its phases.
  SEC. 4.  Section 6702.6 is added to the Business and Professions
Code, to read:
   6702.6.  "Nuclear engineer" means a professional engineer in the
branch of nuclear engineering and refers to one who practices or
offers to practice nuclear engineering in any of its phases.
  SEC. 5.  Section 6702.7 is added to the Business and Professions
Code, to read:
   6702.7.  "Petroleum engineer" means a professional engineer in the
branch of petroleum engineering and refers to one who practices or
offers to practice petroleum engineering in any of its phases.
  SEC. 6.  Section 6702.8 is added to the Business and Professions
Code, to read:
   6702.8.  "Traffic engineer" means a professional engineer in the
branch of traffic engineering and refers to one who practices or
offers to practice traffic engineering in any of its phases.
  SEC. 7.  Section 6702.9 is added to the Business and Professions
Code, to read:
   6702.9.  "Agricultural engineer" means a professional engineer in
the branch of agricultural engineering and refers to one who
practices or offers to practice agricultural engineering in any of
its phases.
  SEC. 8.  Section 6702.10 is added to the Business and Professions
Code, to read:
   6702.10.  "Industrial engineer" means a professional engineer in
the branch of industrial engineering and refers to one who practices
or offers to practice industrial engineering in any of its phases.
  SEC. 9.  Section 6702.11 is added to the Business and Professions
Code, to read:
   6702.11.  "Metallurgical engineer" means a professional engineer
in the branch of metallurgical engineering and refers to one who
practices or offers to practice metallurgical engineering in any of
its phases.
  SEC. 10.  Section 6704 of the Business and Professions Code is
amended to read:
   6704.  (a) In order to safeguard life, health, property, and
public welfare, no person shall practice agricultural, chemical,
civil, control system, electrical, fire protection, industrial,
mechanical, metallurgical, nuclear, petroleum, or traffic engineering
unless appropriately licensed or specifically exempted from
licensure under this chapter, and only persons licensed under this
chapter shall be entitled to take and use the titles "consulting
engineer," "professional engineer," "licensed engineer," or
"registered engineer," or any combination of those titles or
abbreviations thereof, and according to licensure with the board the
engineering branch titles specified in Section 6732, or the authority
titles specified in Sections 6736 and 6736.1, or the title
"engineer-in-training."
   (b) The provisions of this section shall not prevent the use of
the title "consulting engineer" by a person who has qualified for and
maintained exemption for using that title under the provisions of
Section 6732.1, or by a person licensed as a photogrammetric
surveyor.
  SEC. 11.  Section 6704.1 of the Business and Professions Code is
repealed.
  SEC. 12.  Section 6706.3 of the Business and Professions Code is
amended to read:
   6706.3.  Any reference in any law or regulation to a registered
engineer, or to a registered agricultural, chemical, civil, control
system, electrical, fire protection, industrial, mechanical,
metallurgical, nuclear, petroleum, or traffic engineer, is deemed to
refer to a licensed engineer, or to a licensed agricultural,
chemical, civil, control system, electrical, fire protection,
industrial, mechanical, metallurgical, nuclear, petroleum, or traffic
engineer, as the case may be.
  SEC. 13.  Section 6730 of the Business and Professions Code is
amended to read:
   6730.  In order to safeguard life, health, property and public
welfare, any person, either in a public or private capacity, except
as in this chapter specifically excepted, who practices, or offers to
practice, agricultural engineering, chemical engineering, civil
engineering, control system engineering, electrical engineering, fire
protection engineering, industrial engineering, mechanical
engineering, metallurgical engineering, nuclear engineering,
petroleum engineering, or traffic engineering in any of its branches
in this state, including any person employed by the State of
California, or any city, county, or city and county, who practices
engineering, shall submit evidence that he or she is qualified to
practice, and shall be licensed accordingly as an agricultural
engineer, chemical engineer, civil engineer, control system engineer,
electrical engineer, fire protection engineer, industrial engineer,
mechanical engineer, metallurgical engineer, nuclear engineer,
petroleum engineer, or traffic engineer by the board. 
  SEC. 14.    Section 6730.5 is added to the
Business and Professions Code, to read:
   6730.5.  (a) The professional practice of engineering in the
branches and title authorities described in this chapter may overlap,
and some activities are common to two or more branches and title
authorities.
   (b) Nothing in this chapter shall prohibit overlap by an engineer
licensed under the provisions of this chapter except in the area of
structural engineering as defined in Section 6731.8. The scope of
overlap is limited to his or her area of competency defined in
Section 6730.6 and is further limited to practicing or offering to
practice any engineering in connection with and incidental to his or
her branch of licensure.
   (c) As that engineering work may be in connection with and
incidental to the engineering work of the professional engineer on a
specific project or activities related to a professional engineer's
licensed branch of engineering, it shall not be necessary for the
board to define in regulation permissible engineering work that may
be in connection with and incidental to the engineering work of the
professional engineer, or which specific tasks or activities a
professional engineer may or may not perform.
   (d) No local agency, including a city, county, city and county,
special district, or joint powers authority, may impose a requirement
that limits or restricts a licensed engineer's ability to practice
engineering in or before the local agency in any manner that
conflicts with the provisions of this chapter. 
   SEC. 15.   SEC. 14.   Section 6730.6 is
added to the Business and Professions Code, to read:
   6730.6.  A professional engineer may practice engineering work
only in the field or fields in which he or she is by education or
experience competent and proficient.
   SEC. 16.   SEC. 15.   Section 6730.7 is
added to the Business and Professions Code, to read:
   6730.7.  (a) Subject to Section 6730.6, any engineer who holds a
valid license may practice without limitation or restriction in the
following practice areas: agricultural engineering, chemical
engineering, control system engineering, fire protection engineering,
industrial engineering, metallurgical engineering, nuclear
engineering, petroleum engineering, and traffic engineering.
   (b) No local agency, including a city, county, city and county,
special district, or joint powers authority, may impose a requirement
that limits or restricts a licensed engineer's ability to practice
engineering in or before the local agency in any manner that
conflicts with the provisions of this chapter.
   SEC. 17.   SEC. 16.   Section 6731.7 is
added to the Business and Professions Code, to read:
   6731.7.  The following definitions may not be construed as
regulating any  generally recognized  profession other than
professional engineering  , even when the duties and practices of
the generally recognized profession overlap the duties and practices
defined in this section  :
   (a) "Agricultural engineering" is that branch of professional
engineering that requires such education and experience as is
necessary to understand and apply engineering principles to the
design, construction, and use of specialized equipment, machines,
structures, and materials relating to the agricultural industry, the
economy, food safety, and the environment. It requires knowledge of
the engineering sciences relating to, and the effect on food safety
and the environment from, the following: physical and biological
properties of, and processing of, foods and fibers; atmospheric
phenomena as they are related to agricultural operations; drainage
and farm water discharge; soil dynamics as related to traction,
tillage, and plant-soil-water relationships; human factors relative
to safe design and use of agricultural machines; and the safe and
proper application and use of agricultural chemicals.
   A person practices agricultural engineering when he or she
professes to be an agricultural engineer or is in responsible charge
of agricultural engineering work.
   (b) "Chemical engineering" is that branch of professional
engineering that embraces studies or activities relating to the
development and application of processes in which chemical or
physical changes of materials are involved. These processes are
usually resolved into a coordinated series of unit physical
operations and unit chemical processes. It is concerned with the
research, design, production, operational, organizational, and
economic aspects of the above.
   A person practices chemical engineering when he or she professes
to be a chemical engineer or is in responsible charge of chemical
engineering work.
   (c) "Control system engineering" is that branch of professional
engineering that requires such education and experience as is
necessary to understand the science of instrumentation and automatic
control of dynamic processes, and requires the ability to apply this
knowledge to the planning, development, operation, and evaluation of
systems of control so as to ensure the safety and practical
operability of those processes.
   A person practices control system engineering when he or she
professes to be a control system engineer or is in responsible charge
of control system engineering work.
   (d) "Fire protection engineering" is that branch of professional
engineering that requires such education and experience as is
necessary to understand the engineering principles relating to the
safeguarding of life and property from fire, fire-related hazards and
explosions. It requires the ability to apply this knowledge to the
identification, evaluation, correction, or prevention of present or
potential fire, fire-related explosion hazards, and any resultant
panic therefrom, in buildings, groups of buildings, or communities.
It includes the arrangement and use of appropriate safeguards, and
executing the engineering design for fire-resistant building
materials and fire detection and alarm, smoke control, egress and
fire-suppression systems, fire-suppression water supply, and other
devices and apparatus in order to protect life and property.
   A person practices fire protection engineering when he or she
professes to be a fire protection engineer or is in responsible
charge of fire protection engineering work.
   (e) "Industrial engineering" is that branch of professional
engineering that requires such education and experience as is
necessary to investigate, design, and evaluate systems of persons,
materials, and facilities for the purpose of economical and efficient
production, use, and distribution. It requires the application of
specialized engineering knowledge of the mathematical and physical
sciences, together with the principles and methods of engineering
analysis and design to specify, predict, and evaluate the results to
be obtained from those systems.
   A person practices industrial engineering when he or she professes
to be an industrial engineer or is in responsible charge of
industrial engineering work.
   (f) "Metallurgical engineering" is that branch of professional
engineering that requires such education and experience as is
necessary to seek, understand, and apply the principles of the
properties and behavior of metals in solving engineering problems
dealing with the research, development, and application of metals and
alloys, and the manufacturing practices of extracting, refining, and
processing of metals.
   A person practices metallurgical engineering when he or she
professes to be a metallurgical engineer or is in responsible charge
of metallurgical engineering work.
   (g) "Nuclear engineering" is that branch of professional
engineering that requires such education and experience as is
necessary to apply the principles of nuclear physics to the
engineering utilization of nuclear phenomena for the benefit of
mankind, and that is also concerned with the protection of the public
from the potential hazards of radiation and radioactive materials.
Nuclear engineering is primarily concerned with the interaction of
radiation and nuclear particles with matter. Nuclear engineering
requires the application of specialized knowledge of the mathematical
and physical sciences, together with the principles and methods of
engineering design and nuclear analysis to specify, predict, and
evaluate the behavior of systems involving nuclear reactions, and to
ensure the safe, efficient operation of these systems, and their
nuclear products and byproducts. Nuclear engineering encompasses, but
is not limited to, the planning and design of the specialized
equipment and process systems of nuclear reactor facilities, and the
protection of the public from any hazardous radiation produced in the
entire nuclear reaction process. These activities include all
aspects of the manufacture, transportation, and use of radioactive
materials.
   A person practices nuclear engineering when he or she professes to
be a nuclear engineer or is in responsible charge of nuclear
engineering work.
   (h) "Petroleum engineering" is that branch of professional
engineering that embraces studies or activities relating to the
exploration, exploitation, location, and recovery of natural fluid
hydrocarbons. It is concerned with research, design, production, and
operation of devices and the economic aspects of the above.
   A person practices petroleum engineering when he or she professes
to be a petroleum engineer or is in responsible charge of petroleum
engineering work.
   (i) "Traffic engineering" is that branch of professional
engineering that requires such education and experience as is
necessary to understand the science of measuring traffic and travel
and the human factors relating to traffic generation and flow, and
requires the ability to apply this knowledge to planning, operation,
design, and evaluation of streets and highways and their networks,
abutting lands, and interrelationships with other modes of travel,
and to provide safe and efficient movement of people and goods.
   A person practices traffic engineering when he or she professes to
be a traffic engineer or is in responsible charge of traffic
engineering work.
   (j) As it applies to the engineering branch disciplines in this
section, all engineering plans, specifications, calculations, and
reports (hereafter documents) prepared by, or under the responsible
charge of, a licensed engineer in the appropriate engineering branch
shall include his or her name and license number. Interim documents
shall include a notation as to the intended purpose of the document,
such as "preliminary," "not for construction," "for plan check only,"
or "for review only." All engineering plans and specifications that
are permitted or that are to be released for construction shall bear
the signature and seal or stamp of the licensee, the date of signing
and sealing or stamping, and the expiration date of the license. All
final engineering calculations and reports shall bear the signature
and seal or stamp of the licensee, the date of signing and sealing or
stamping, and the expiration date of the license. If engineering
plans are required to be signed and sealed or stamped and have
multiple sheets, the signature, seal or stamp, date of signing and
sealing or stamping, and expiration date of the license shall appear
on each sheet of the plans. If engineering specifications,
calculations, and reports are required to be signed and sealed or
stamped and have multiple pages, the signature, seal or stamp, date
of signing and sealing or stamping, and expiration date of the
license shall appear at a minimum on the title sheet, cover sheet, or
signature sheet.
   (k) Notwithstanding subdivision (j), a licensed engineer who signs
engineering documents shall not be responsible for damage caused by
subsequent changes to or uses of those documents, if the subsequent
changes or uses, including changes or uses made by state or local
governmental agencies, are not authorized or approved by the licensed
engineer who originally signed the documents, provided that the
engineering service rendered by the licensed engineer who signed the
documents was not also a proximate cause of the damage. 
  SEC. 18.    Section 6731.8 is added to the
Business and Professions Code, to read:
   6731.8.  Structural engineering is that part of civil engineering
that involves the application of specialized civil engineering
knowledge and experience to the design and analysis of buildings or
other structures that are constructed or rehabilitated to resist
forces induced by vertical and horizontal loads of a static and
dynamic nature. This specialized knowledge includes familiarity with
scientific and mathematical principles, experimental research data,
and practical construction methods and processes. The design and
analysis shall include consideration of stability, deflection,
stiffness, and other structural phenomena that affect the behavior of
the building or other structure.  
  SEC. 19.    Section 6737.2 of the Business and
Professions Code is repealed. 
   SEC. 20.   SEC. 17.   Section 6737.3 of
the Business and Professions Code is amended to read:
   6737.3.  (a) A contractor licensed under Chapter 9 (commencing
with Section 7000) of Division 3 is exempt from the provisions of
this chapter relating to the practice of control system, electrical,
fire protection, or mechanical engineering so long as the services he
or she holds himself or herself out as able to perform or does
perform, which services are subject to the provisions of this
chapter, are performed by, or under the responsible charge of a
registered control system, electrical, fire protection, or mechanical
engineer insofar as the control system, electrical, fire protection,
or mechanical engineer practices the branch of engineering for which
he or she is licensed.
   (b) This section shall not prohibit a licensed contractor, while
engaged in the business of contracting for the installation of
control system, electrical, fire protection, or mechanical systems or
facilities, from designing those systems or facilities in accordance
with applicable construction codes and standards for work to be
performed and supervised by that contractor within the classification
for which his or her license is issued, or from preparing control
system, electrical, fire protection, or mechanical shop or field
drawings for work which he or she has contracted to perform. Nothing
in this section is intended to imply that a licensed contractor may
design work that is to be installed by another person.
   SEC. 21.   SEC. 18.   Section 6738 of
the Business and Professions Code is amended to read:
   6738.  As used in this section, "professional engineering services"
means agricultural, chemical, civil, control system, electrical,
fire protection, industrial, mechanical, metallurgical, nuclear,
petroleum, or traffic engineering services.
   (a) This chapter does not prohibit one or more agricultural,
chemical, civil, control system, electrical, fire protection,
industrial, mechanical, metallurgical, nuclear, petroleum, or traffic
engineers from practicing or offering to practice within the scope
of their license agricultural, chemical, civil, control system,
electrical, fire protection, industrial, mechanical, metallurgical,
nuclear, petroleum, or traffic engineering as a sole proprietorship,
partnership, firm, or corporation (hereafter called business), as
long as all of the following requirements are met:
   (1) An agricultural, chemical, civil, control system, electrical,
fire protection, industrial, mechanical, metallurgical, nuclear,
petroleum, or traffic engineer currently licensed in this state is an
owner, part owner, partner, or officer in charge of the engineering
practice of the business.
   (2) All professional engineering services are performed by, or
under the responsible charge of, a licensed engineer in the
appropriate branch of professional engineering.
   (3) The business name of a California business shall only contain
the name of any person who is licensed by the board in a branch of
professional engineering, a licensed land surveyor, a licensed
architect, or a geologist registered under the Geologist and
Geophysicist Act (Chapter 12.5 (commencing with Section 7800)). Any
offer, promotion, or advertisement by the business that contains the
name of any individual in the business, other than by use of the name
of an individual in the business name, shall clearly and
specifically designate the license or registration discipline of each
individual named.
   (b) An out-of-state business with a branch office in this state
shall meet the requirements of subdivision (a) and shall have a part
owner or officer who is in charge of the engineering work in the
branch in this state, who is licensed in this state, and who is
physically present at the branch office in this state on a regular
basis. However, the name of the business may contain the name of any
person not licensed in this state if that person is appropriately
registered or licensed in another state. Any offer, promotion, or
advertisement which contains the name of any individual in the
business, other than by use of the names of the individuals in the
business name, shall clearly and specifically designate the license
or registration discipline of each individual named.
   (c) A fictitious name may be used for an engineering business if
(1) the name does not conflict with paragraph (3) of subdivision (a)
requiring that names used in the business name shall be appropriately
licensed or registered individuals and (2) an organization record
form is filed with the board.
   (d) A person not licensed under this chapter may also be a part
owner or an officer of an agricultural, chemical, civil, control
system, electrical, fire protection, industrial, mechanical,
metallurgical, nuclear, petroleum, or traffic engineering business if
the requirements of subdivision (a) are met. Nothing in this section
shall be construed to permit a person who is not licensed under this
chapter to be the sole owner of an agricultural, chemical, civil,
control system, electrical, fire protection, industrial, mechanical,
metallurgical, nuclear, petroleum, or traffic engineering business,
unless otherwise exempt under this chapter.
   (e) This chapter does not prevent an individual or business
engaged in any line of endeavor other than the practice of
agricultural, chemical, civil, control system, electrical, fire
protection, industrial, mechanical, metallurgical, nuclear,
petroleum, or traffic engineering from employing or contracting with
a licensed agricultural, chemical, civil, control system, electrical,
fire protection, industrial, mechanical, metallurgical, nuclear,
petroleum, or traffic engineer to perform the respective engineering
services incidental to the conduct of business.
   (f) This section shall not prevent the use of the name of any
business engaged in rendering professional engineering services,
including the use by any lawful successor or survivor, that lawfully
was in existence on December 31, 1987. However, the business is
subject to paragraphs (1) and (2) of subdivision (a) and the business
shall file an organization record form with the board as designated
by board rule.
   (g) A business engaged in rendering professional engineering
services may use in its name the name of a deceased or retired person
provided all of the following conditions are satisfied:
   (1) The person's name had been used in the name of the business,
or a predecessor in interest of the business, prior to and after the
death or retirement of the person.
   (2) The person shall have been an owner, part owner, or officer of
the business, or an owner, part owner, or officer of the predecessor
in interest of the business.
   (3) The person shall have been licensed as a professional
engineer, or a land surveyor, or an architect, or a geologist, (A) by
the appropriate licensing board if that person is operating a place
of business or practice in this state, or (B) by the applicable state
board if no place of business existed in this state.
   (4) The person, if retired, has consented to the use of the name
and does not permit the use of the name in the title of another
professional engineering business in this state during the period of
the consent. However, the retired person may use his or her name as
the name of a new or purchased business if it is not identical in
every respect to that person's name as used in the former business.
   (5) The business shall be subject to the provisions of paragraphs
(1) and (2) of subdivision (a).
   (6) The business files a current organization record form with the
board.
   (h) This section does not affect the provisions of Sections 6731.2
and 8726.1.

            (i) All businesses engaged in rendering professional
engineering services shall file a current organization record form
with the board.
   SEC. 22.   SEC. 19.   Section 6740 of
the Business and Professions Code is amended to read:
   6740.  A subordinate to an agricultural, chemical, civil, control
system, electrical, fire protection, industrial, mechanical,
metallurgical, nuclear, petroleum, or traffic engineer licensed under
this chapter, or a subordinate to an agricultural, chemical, civil,
control system, electrical, fire protection, industrial, mechanical,
metallurgical, nuclear, petroleum, or traffic engineer exempted from
licensure under this chapter, insofar as he or she acts solely in
that capacity, is exempt from licensure under the provisions of this
chapter. This exemption, however, does not permit the subordinate to
practice agricultural, chemical, civil, control system, electrical,
fire protection, industrial, mechanical, metallurgical, nuclear,
petroleum, or traffic engineering in his or her own right or to use
the titles listed in Sections 6732, 6736, and 6736.1.
   SEC. 23.   SEC. 20.   Section 6741 of
the Business and Professions Code is amended to read:
   6741.  Any person, firm, partnership, or corporation is exempt
from licensure under the provisions of this chapter who meets all the
following:
   (a) Is a nonresident of the State of California.
   (b) Is legally qualified in another state to practice as an
agricultural, chemical, civil, control system, electrical, fire
protection, industrial, mechanical, metallurgical, nuclear,
petroleum, or traffic engineer.
   (c) Does not maintain a regular place of business in this state.
   (d) Offers to but does not practice agricultural, chemical, civil,
control system, electrical, fire protection, industrial, mechanical,
metallurgical, nuclear, petroleum, or traffic engineering in this
state.
   SEC. 24.  SEC. 21.   Section 6787 of the
Business and Professions Code is amended to read:
   6787.  Every person is guilty of a misdemeanor:
   (a) Who, unless he or she is exempt from licensure under this
chapter, practices or offers to practice agricultural, chemical,
civil, control system, electrical, fire protection, industrial,
mechanical, metallurgical, nuclear, petroleum, or traffic engineering
in this state according to the provisions of this chapter without
legal authorization.
   (b) Who presents or attempts to file as his or her own the
certificate of licensure of a licensed professional engineer unless
he or she is the person named on the certificate of licensure.
   (c) Who gives false evidence of any kind to the board, or to any
member thereof, in obtaining a certificate of licensure.
   (d) Who impersonates or uses the seal of a licensed professional
engineer.
   (e) Who uses an expired, suspended, surrendered, or revoked
certificate issued by the board.
   (f) Who represents himself or herself as, or uses the title of, a
licensed or registered agricultural, chemical, civil, control system,
electrical, fire protection, industrial, mechanical, metallurgical,
nuclear, petroleum, or traffic engineer, or any other title whereby
that person could be considered as practicing or offering to practice
agricultural, chemical, civil, control system, electrical, fire
protection, industrial, mechanical, metallurgical, nuclear,
petroleum, or traffic engineering in any of its branches, unless he
or she is correspondingly qualified by licensure as an agricultural,
chemical, civil, control system, electrical, fire protection,
industrial, mechanical, metallurgical, nuclear, petroleum, or traffic
engineer under this chapter.
   (g) Who, unless appropriately licensed, manages, or conducts as
manager, proprietor, or agent, any place of business from which
agricultural, chemical, civil, control system, electrical, fire
protection, industrial, mechanical, metallurgical, nuclear,
petroleum, or traffic engineering work is solicited, performed, or
practiced, except as authorized pursuant to subdivision (d) of
Section 6738 and Section 8726.1.
   (h) Who uses the title, or any combination of that title, of
"professional engineer," "licensed engineer," "registered engineer,"
or the branch titles specified in Section 6732, or the authority
titles specified in Sections 6736 and 6736.1, or
"engineer-in-training," or who makes use of any abbreviation of that
title that might lead to the belief that he or she is a licensed
engineer, is authorized to use the titles specified in Section 6736
or 6736.1, or holds a certificate as an engineer-in-training, without
being licensed, authorized, or certified as required by this
chapter.
   (i) Who uses the title "consulting engineer" without being
licensed as required by this chapter or without being authorized to
use that title pursuant to legislation enacted at the 1963, 1965, or
1968 Regular Session.
   (j) Who violates any provision of this chapter.
   SEC. 25.   SEC. 22.   No reimbursement
is required by this act pursuant to Section 6 of Article XIII B of
the California Constitution because the only costs that may be
incurred by a local agency or school district will be incurred
because this act creates a new crime or infraction, eliminates a
crime or infraction, or changes the penalty for a crime or
infraction, within the meaning of Section 17556 of the Government
Code, or changes the definition of a crime within the meaning of
Section 6 of Article XIII B of the California Constitution.
     
feedback