Bill Text: IN HB1188 | 2010 | Regular Session | Introduced
NOTE: There are more recent revisions of this legislation. Read Latest Draft
Bill Title: Various motor vehicle matters.
Spectrum: Slight Partisan Bill (Democrat 2-1)
Status: (Passed) 2010-03-25 - Sections 18 through 19 effective 03/18/2010 [HB1188 Detail]
Download: Indiana-2010-HB1188-Introduced.html
PRINTING CODE. Amendments: Whenever an existing statute (or a section of the Indiana Constitution) is being amended, the text of the existing provision will appear in this style type, additions will appear in this style type, and deletions will appear inthis style type.
Additions: Whenever a new statutory provision is being enacted (or a new constitutional provision adopted), the text of the new provision will appear in this style type. Also, the word NEW will appear in that style type in the introductory clause of each SECTION that adds a new provision to the Indiana Code or the Indiana Constitution.
Conflict reconciliation: Text in a statute in this style type orthis style type reconciles conflicts
between statutes enacted by the 2009 Regular and Special Sessions of the General Assembly.
Bill Title: Various motor vehicle matters.
Spectrum: Slight Partisan Bill (Democrat 2-1)
Status: (Passed) 2010-03-25 - Sections 18 through 19 effective 03/18/2010 [HB1188 Detail]
Download: Indiana-2010-HB1188-Introduced.html
Introduced Version
HOUSE BILL No. 1188
_____
DIGEST OF INTRODUCED BILL
Citations Affected: IC 9-13-2-97; IC 9-18-26; IC 9-29-5-14.5.
Synopsis: Manufacturer's plates for subcomponent systems. Requires
the secretary of state to adopt rules to establish a classification of dealer
license plates for the manufacturers of vehicle subcomponent systems,
and permits rules to be adopted prescribing the general conditions for
use of license plates for the additional classification of manufacturers
of vehicle subcomponent systems. Sets a $10 fee for a dealer license
plate for a manufacturer of vehicle subcomponent systems. Requires
the secretary of state to adopt interim written guidelines regarding the
classification of dealer license plates for the manufacturers of vehicle
subcomponent systems.
Effective: Upon passage.
Austin, Neese, Fry
January 11, 2010, read first time and referred to Committee on Roads and Transportation.
Introduced
Second Regular Session 116th General Assembly (2010)
PRINTING CODE. Amendments: Whenever an existing statute (or a section of the Indiana Constitution) is being amended, the text of the existing provision will appear in this style type, additions will appear in this style type, and deletions will appear in
Additions: Whenever a new statutory provision is being enacted (or a new constitutional provision adopted), the text of the new provision will appear in this style type. Also, the word NEW will appear in that style type in the introductory clause of each SECTION that adds a new provision to the Indiana Code or the Indiana Constitution.
Conflict reconciliation: Text in a statute in this style type or
HOUSE BILL No. 1188
A BILL FOR AN ACT to amend the Indiana Code concerning
motor vehicles.
Be it enacted by the General Assembly of the State of Indiana:
SOURCE: IC 9-13-2-97; (10)IN1188.1.1. -->
SECTION 1. IC 9-13-2-97, AS AMENDED BY P.L.147-2009,
SECTION 4, IS AMENDED TO READ AS FOLLOWS [EFFECTIVE
UPON PASSAGE]: Sec. 97. (a) "Manufacturer" means, except as
provided in subsection subsections (b) and (c), a person engaged in the
business of constructing or assembling vehicles, of a type required to
be registered under IC 9-18, at an established place of business. The
term does not include a converter manufacturer, an automotive
mobility dealer, or a recreational vehicle manufacturer.
(b) "Manufacturer", for purposes of IC 9-18-26, in addition to a person described in subsection (a), includes a manufacturer of a vehicle subcomponent system.
(b) (c) "Manufacturer", for purposes of IC 9-23, means a person who
is engaged in the business of manufacturing or assembling new motor
vehicles or major component parts of motor vehicles, or both, and sells
new motor vehicles to dealers, wholesale dealers, distributors, or the
general public. The term includes the following:
(1) A factory branch office of the manufacturer.
(2) An authorized representative of the manufacturer.
(3) A partnership, a firm, an association, a joint venture, a limited liability company, a corporation, or a trust, resident or nonresident, that is controlled by the manufacturer.
The term does not include a converter manufacturer, an automotive mobility dealer, or a recreational vehicle manufacturer.
(b) "Manufacturer", for purposes of IC 9-18-26, in addition to a person described in subsection (a), includes a manufacturer of a vehicle subcomponent system.
(1) A factory branch office of the manufacturer.
(2) An authorized representative of the manufacturer.
(3) A partnership, a firm, an association, a joint venture, a limited liability company, a corporation, or a trust, resident or nonresident, that is controlled by the manufacturer.
The term does not include a converter manufacturer, an automotive mobility dealer, or a recreational vehicle manufacturer.
SOURCE: IC 9-18-26-2; (10)IN1188.1.2. -->
SECTION 2. IC 9-18-26-2, AS AMENDED BY P.L.106-2008,
SECTION 6, IS AMENDED TO READ AS FOLLOWS [EFFECTIVE
UPON PASSAGE]: Sec. 2. (a) The secretary of state shall issue dealer
license plates under this chapter according to the following
classifications:
(1) Dealer-new.
(2) Dealer-used.
(3) Manufacturer.
(b) The secretary of state shall adopt rules under IC 4-22-2 to establish an additional classification of dealer license plates for the manufacturers of vehicle subcomponent systems and, by rule under IC 4-22-2, may prescribe the general conditions for the use of license plates for the additional classification of dealer license plates for manufacturers of vehicle subcomponent systems. The fee for a dealer license plate for a manufacturer of vehicle subcomponent systems is the fee under IC 9-29-5-14.5. The rules must provide that the dealer license plate for a manufacturer of vehicle subcomponent systems be displayed in accordance with IC 9-18-2-26.
(b) (c) The secretary of state may adopt rules under IC 4-22-2 to
establish additional classifications of dealer license plates and may
prescribe the general conditions for usage of an additional
classification. The secretary of state shall establish the classification of
antique car museum dealer license plates.
(1) Dealer-new.
(2) Dealer-used.
(3) Manufacturer.
(b) The secretary of state shall adopt rules under IC 4-22-2 to establish an additional classification of dealer license plates for the manufacturers of vehicle subcomponent systems and, by rule under IC 4-22-2, may prescribe the general conditions for the use of license plates for the additional classification of dealer license plates for manufacturers of vehicle subcomponent systems. The fee for a dealer license plate for a manufacturer of vehicle subcomponent systems is the fee under IC 9-29-5-14.5. The rules must provide that the dealer license plate for a manufacturer of vehicle subcomponent systems be displayed in accordance with IC 9-18-2-26.
SOURCE: IC 9-18-26-6; (10)IN1188.1.3. -->
SECTION 3. IC 9-18-26-6 IS AMENDED TO READ AS
FOLLOWS [EFFECTIVE UPON PASSAGE]: Sec. 6. Except as
provided in sections 7, and 8, and 8.5 of this chapter, dealer-new,
dealer-used, and manufacturer license plates may only be used on
motor vehicles in the:
(1) dealer's inventory being held for sale;
(2) usual operation of that manufacturer's or dealer's business;
(3) movement of that manufacturer's or dealer's inventory; or
(4) inventory of a manufacturer or dealer that is unattended by that manufacturer or dealer or the dealer's agent for a maximum of ten (10) days by a prospective buyer or a service customer.
(1) dealer's inventory being held for sale;
(2) usual operation of that manufacturer's or dealer's business;
(3) movement of that manufacturer's or dealer's inventory; or
(4) inventory of a manufacturer or dealer that is unattended by that manufacturer or dealer or the dealer's agent for a maximum of ten (10) days by a prospective buyer or a service customer.
SOURCE: IC 9-18-26-8.5; (10)IN1188.1.4. -->
SECTION 4. IC 9-18-26-8.5 IS ADDED TO THE INDIANA CODE
AS A NEW SECTION TO READ AS FOLLOWS [EFFECTIVE
UPON PASSAGE]: Sec. 8.5. A dealer license plate for a
manufacturer of vehicle subcomponent systems under section 2(b)
of this chapter may be used in accordance with rules adopted by
the secretary of state under IC 4-22-2.
SOURCE: IC 9-29-5-14.5; (10)IN1188.1.5. -->
SECTION 5. IC 9-29-5-14.5 IS ADDED TO THE INDIANA CODE
AS A NEW SECTION TO READ AS FOLLOWS [EFFECTIVE
UPON PASSAGE]: Sec. 14.5. The fee for a dealer license plate for
a manufacturer of vehicle subcomponent systems under
IC 9-18-26-2(b) is ten dollars ($10). There is no fee in addition to
the regular registration fee for a license plate for a manufacturer
of vehicle subcomponent systems.
SOURCE: ; (10)IN1188.1.6. -->
SECTION 6. [EFFECTIVE UPON PASSAGE] (a)
Notwithstanding IC 9-18-26-2(b), as amended by this act, and
IC 9-18-26-8.5, as added by this act, the secretary of state shall
carry out the duties imposed upon the secretary of state under
IC 9-18-26-2(b), as amended by this act, and IC 9-18-26-8.5, as
added by this act, under interim written guidelines approved by the
secretary of state.
(b) This SECTION expires on the earlier of the following:
(1) The date rules are adopted under IC 9-18-26-2(b), as amended by this act, and IC 9-18-26-8.5, as added by this act.
(2) December 31, 2011.
(b) This SECTION expires on the earlier of the following:
(1) The date rules are adopted under IC 9-18-26-2(b), as amended by this act, and IC 9-18-26-8.5, as added by this act.
(2) December 31, 2011.
SOURCE: ; (10)IN1188.1.7. -->
SECTION 7. An emergency is declared for this act.
